Ø35
- Code
- D350-32 / D350-51
- Diameter
- 350 mm
- Height
- 166,7 mm
The smaller bowl with a deep hemispherical form. With Ø32 or Ø51 pole options it can be used single-tier or stacked.
DISPLAYS03 / 07
Bowl Display Stands
BOWL AND SPHERETRANSPARENT BODYCOUNTER OR FLOORFAST SETUP
Bowl-shaped display units for loose and bagged products, together with the transparent countertop sphere models. They keep the product visible from above and make both picking and refilling quick.
MODELS
Standard sizes
The sizes below are standard models with existing tooling. If you need a different size, we produce a project-specific mould.
Ø35E
- Code
- D350-32E / D350-51E
- Diameter
- 350 mm
- Height
- 244 mm (etek çapı)
The skirted version of the Ø35 bowl. The 244 mm skirt seats the bowl on the pole and closes the transition to the body.
Ø50
- Code
- D500-32 / D500-51
- Diameter
- 483,9 mm
- Height
- 144,7 mm
Its wide, shallow form provides high-volume display. The shallow depth keeps the whole product visible.
Ø50E
- Code
- D500-32E / D500-51E
- Diameter
- 483,9 mm
- Height
- 172,5 mm
The skirted version of the Ø50 bowl. The 29.4 mm lower section conceals the pole connection, giving a tidier look in stacked setups.
Küre Ø200
- Code
- K200
- Diameter
- 200 mm
- Height
- 173 mm
The transparent countertop sphere with an opening lid, smaller size. Outer sizes 240 × 210 × 173 mm. It displays without taking up counter or checkout space.
Küre Ø250
- Code
- K250
- Diameter
- 250 mm
- Height
- 225 mm
The larger sphere. Outer sizes 292 × 253 × 225 mm. It offers extra internal volume for bulkier products and multi-piece promotional sets.
Bowl Display Stands — Overview
Display bowls are a versatile solution for presenting loose and free-standing products attractively.
They come in two sizes, Ø50 cm and Ø35 cm. A bowl can be used directly on a counter or turned into a floor-standing display with the optional stand. Its plain form and flexible structure adapt easily to different sales areas.
The countertop members of the same family are the sphere models. The transparent body with its opening lid shows the product clearly, and the header on top opens a dedicated area for brand communication. Produced in two diameters, Ø200 mm and Ø250 mm, they are used for small-packaged and promotional products in tight spaces such as checkouts and counters.
Where It Is Used
- Checkout and countertop display
- Confectionery and nut aisles
- Bagged snack towers
- Seasonal, launch and promotional programmes
Related Industries
- Beverage
- Food
- Snack
- Cosmetics
- Personal Care
- Home Care
- Electronics
- Pharmacy
- Stationery
- and other sectors
KEY POINTS
Three things that set this typology apart.
01 Bowl and sphere
Ø35 and Ø50 bowls share one pole system; Ø200 and Ø250 spheres sit on the counter.
02 Counter or floor
A bowl sits on a counter or on the optional floor stand; the sphere is countertop only.
03 Transparent body
Sphere models show the product clearly through a transparent, hinged-lid body; bowls keep the pile visible from above, speeding up both picking and refilling.
COMMON QUESTIONS
About this typology
Can bowl displays be used in contact with food?
On request they are produced from food-contact grade material. If unpackaged product will be displayed, this must be stated at the start of the project — material choice and surface finish depend on it.
Can the bowl colour match the brand?
Yes. The raw material is coloured with masterbatch, so colour sits in the material rather than on the surface — a scratch does not reveal a different tone underneath.
Should I choose a bowl or a sphere?
If the product is loose or bagged and you want a high-volume pile, choose a bowl; if it is small-packaged, individual and visually strong, choose the countertop sphere. A bowl can go to the floor with the optional stand, while the sphere stays on the counter.
Can the sphere header be customised per brand?
Yes. The header is a dedicated brand communication area; when the campaign changes only the header is replaced and the body stays on the counter.
OTHER SOLUTIONS
Other display typologies
WHY A DISPLAY?
Why use a display stand?
A display stand does not do a single job in store. It shapes the space a brand takes, how visible the product is and how fast it sells — all at once.
- 01
Visibility & Access
- Wins more floor space in store for the brand and the product.
- Increases product visibility.
- Makes the product easier to reach.
- Helps present the range in a way shoppers can read at a glance.
- 02
Brand Perception
- Carries brand identity accurately to the point of sale.
- Reinforces how the brand is perceived.
- Builds a premium product perception.
- Strengthens the brand's presence at the point of sale.
- 03
Competitive Edge
- Sets the product apart from its competitors.
- Wins a visibility advantage over rival brands.
- Creates a dedicated point of sale for the brand inside the store.
- 04
Sales & Promotion
- Encourages unplanned purchases.
- Carries the launch of new products.
- Puts campaigns and promotions front and centre.
- 05
Retail Operations
- Makes more efficient use of the selling area.
- Makes selling easier for the retailer.
Let’s adapt this solution to your project.
We set dimensions, shelf count and print area around your product.